According to the public relations report of Zarif Mosavar Manufacturing Industrial Group, Turkey Domotex International Fair is being held in Antalya from July 10 to 13, 2023
Dr. Ali Khorsandian, CEO of Iran Bank of Industry and Mine, also visited Zarif Mosavar factories group located
Zarif Mosavar industrial production group with participation in the international exhibition of home textiles CNR EV TEKSTİLİ 2022 in Turkey, which is the second largest home textile exhibition in the world, it presents its capabilities.
PVC Geomembrane Or Polyvinyl Chloride Geomembranes Are Formed From The Polymerisation Of Vinyl Chloride Monomer. Polyvinylchloride Was Discovered In 1835, And Pipes Made Of Polyvinylchloride Were Used By German Scientists And Engineers During World War Ii To Pipeline Water And Sewage To War-Torn Cities Quickly.
Acrylic Fiber Is Made By Spinning Acrylonitrile Copolymers Over 85% Of Acrylonitrile Monomers. These Fibers Are In Tough Competition With Nylon, Polyester And Polyolefin. Acrylics Have Many Desirable Properties Of Wool And Do Not Have The Disadvantages Of Wool. Therefore, The Usage Of Acrylic Fiber Is Increasing Day By Day.
Polyvinyl Alcohol Fiber Is One Of The Best Types Of Fibers For Reinforcing Concrete Due To Tensile Strength And High Modulus Of Elasticity And Non-Environmental Pollution.
Polyvinyl chloride (PVC) is a very widely used plastic and one of the most valuable products of the petrochemical industry (polymer fibers). Polyvinyl chloride is most widely used in construction and its fibers have the same characteristics. Vinion is defined as a fiber, at least 85% of which are vinyl chloride polymerization monomer units.
Olefin fibers are produced by combining polypropylene fibers with ethylene. The melting point of polyethylene is 120-125 °C and polypropylene is 160-165 °C. Their composition, i.e. polyolefin, cannot be used at temperatures above 100 degrees. Instead with…
Oak Ridge National Laboratory researchers determined that designing polymers specifically with upcycling in mind could reduce future plastic waste considerably and facilitate a circular economy where the material is used repeatedly.
Geosynthetic Polymers (Geomembrane and Geotextile): Surface rupturing during earthquakes is a significant risk to any structure.Polymers can protect buildings from large fault ruptures.